Roofing Contractors in Leeds, North Dakota

Yes. We connect Leeds homeowners in Benson County with licensed, insured roofing contractors. Our network covers all of North Dakota and is available 24/7 for emergency response, inspections, repairs, and full roof replacements in Leeds and surrounding communities. Call (877) 413-1365 to speak with a local North Dakota contractor.

Most residential roofs in North Dakota are designed for 20–40 lbs per square foot of snow load depending on local codes. Wet snow weighs significantly more than dry snow. If you notice ceiling cracks, sticking doors, or visible ridge deflection after heavy snowfall in Leeds, call us immediately — these are signs of structural stress.

Gutter cleaning is a manageable DIY task for most homeowners with a stable ladder, proper footwear, and attention to safety. If the gutters are high, the pitch is steep, or the home is multi-story, professional cleaning is the safer choice.

Gutter guards are covers or inserts designed to keep debris out of gutters while allowing water through. Quality micro-mesh guards significantly reduce cleaning frequency. No gutter guard eliminates cleaning entirely, but good ones extend the interval substantially.

Zinc sulfate or copper-based solution applied to the roof surface kills moss effectively. Rinse gently after treatment — don't pressure wash, which removes granules. Trimming overhanging branches that deposit organic material and shade the roof reduces recurrence.

Pressure washing asphalt shingles removes granules and can void warranties. Low-pressure soft washing with appropriate cleaning solutions is the safe method for cleaning algae and biological growth. Tile and metal roofs have different protocols.

Algae-resistant shingles with zinc or copper granules are the most effective prevention at installation. On existing roofs, zinc strips installed at the ridge release zinc oxide during rain events that inhibits algae. Annual application of diluted zinc sulfate solution treats existing growth.

After. Roofing work deposits debris — granules, old flashing material, fasteners — that will clog gutters if they aren't cleaned after the project. Build post-project gutter cleaning into any scope that involves significant surface work.

A roof maintenance plan is an annual or biennial service agreement with a roofing contractor covering inspection, minor repairs, gutter service, and documented condition reporting. Plans extend service life and ensure early identification of developing issues.

Gutters that are pulling away from the fascia, visibly sagging between hangers, rusting through, or separating at seams should be replaced. Gutters that need rehanging in multiple locations are past cost-effective repair.

Metal roof maintenance includes annual inspection of sealant at penetrations and transitions, checking for paint or coating damage that could allow corrosion, and clearing debris from valleys. Exposed fastener systems need fastener inspection and resealing more frequently than concealed fastener systems.

Flat roof maintenance requires semi-annual inspection of membrane seams and penetrations, keeping drains clear of debris, checking for ponding water areas, and addressing any membrane punctures or seam separations before they allow infiltration.

Tile roofs need annual inspection for cracked or displaced tiles, assessment of the underlayment condition (which ages faster than tile), cleaning to prevent biological growth on the tile surface, and periodic mortar inspection at ridges and hips.

A roof rake with a long telescoping handle allows snow removal from the ground or eave edge without requiring you to access the roof. Remove snow from the lower third of the roof first to reduce weight and ice dam risk. Don't use metal tools that could damage the shingles.