Roofing Contractors in Temple, Oklahoma

Yes. We connect Temple homeowners in Cotton County with licensed, insured roofing contractors. Our network covers all of Oklahoma and is available 24/7 for emergency response, inspections, repairs, and full roof replacements in Temple and surrounding communities. Call (877) 413-1365 to speak with a local Oklahoma contractor.

Hail damage on asphalt shingles appears as dark, circular bruising or divots where granules have been knocked away — often compared to a ball-peen hammer strike. Missing granules expose the underlying asphalt to UV degradation. In Temple, any hail event over 1 inch warrants a professional inspection. We provide written damage assessments for Cotton County homeowners.

Steel roofing is protected from corrosion by galvanized or Galvalume (aluminum-zinc alloy) coatings, then painted with a factory finish. Properly installed and maintained metal roofs resist rust for decades. Bare steel without protective coating would rust.

Thermoplastic polyolefin (TPO) is a single-ply membrane roofing system used on flat and low-slope roofs. Seams are heat-welded, creating strong bonds. White TPO has excellent reflectivity for energy efficiency in hot climates.

Wood shake shingles are split from cedar, redwood, or pine. They offer a natural appearance and good insulation properties but require regular maintenance to resist moisture, mold, and fire risk. Fire-treated products are required in many jurisdictions.

Roof coatings are liquid-applied materials — acrylic, silicone, polyurethane — applied over existing roof surfaces to extend service life and improve reflectivity. They're primarily used on low-slope commercial roofs, not on residential asphalt shingle systems.

Shingle granules are typically crushed slate, ceramic-coated rock, or other mineral aggregates. They protect the asphalt from UV degradation, provide fire resistance, and create the visible color and texture of the shingle surface.

Premium shingles offer heavier weight, thicker laminate construction, higher wind ratings (typically 130 mph+), and extended warranty terms versus standard architectural products. The cost premium is modest relative to the labor cost of installation.

Asphalt shingles generate landfill waste at end of life, though recycling programs exist. Metal roofing is often made with recycled content and is fully recyclable at end of life. Some synthetic products use recycled rubber or plastic.

Wind ratings for asphalt shingles range from Class D (90 mph) to Class H (150 mph). Many premium architectural shingles carry 130 mph ratings. Local building codes may require minimum wind ratings based on regional storm risk.

Light-colored or reflective metal roofing, concrete tile, or Energy Star-rated asphalt shingles perform best in desert climates. Materials that minimize heat absorption reduce attic temperatures and cooling costs.

Yes. Old asphalt shingles can be ground and repurposed as road base aggregate, hot mix asphalt pavement, and other applications. Some contractors and jurisdictions have active shingle recycling programs.

In the roofing context, closed-cell spray foam applied to the attic roof deck creates an unvented conditioned attic assembly. This eliminates traditional ventilation requirements but changes the moisture dynamics of the assembly and requires careful HVAC design.

Copper flashing is used at chimney bases, valleys, and premium installations where longevity and appearance are priorities. Copper is extremely durable — lasting 50-100 years — but costs significantly more than aluminum or galvanized steel.

The nail strip is the designated nailing zone on a shingle — typically the upper portion — where fasteners should be placed to properly secure the shingle and allow correct exposure of the course below. Misplaced nails are a common installation defect.

Solar panels can be installed on most residential roofing materials but work best with asphalt shingles and metal roofing. Mounting on tile requires specific attachment hardware. If the existing roof will need replacement within 5-7 years, replacing it before solar installation avoids later removal and reinstallation cost.